SGS 8 Litre Direct Drive Portable Air Compressor – 5.5CFM, 1.1HP

Introducing NEW Air Compressor from SGS – with 8 Litre receiver tank and portable design. Direct Drive provides maximum performance & efficiency. 8 bar maximum working pressure, offers a fantastic combination of performance, safety and value for money. Fitted with safety valve and pressure regulator with a gauge for controlled air pressure.

	The powerful 1.1 HP motor is capable of delivering up to 5.5 CFM.
	The 8 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

SGS is a British company; our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. Parts, spares and consumables such as oil and air filters are available from SGS. This compressor is fitted with a standard 13A UK plug.

Please note this compressor is for semi-pro and not commercial use.

Specifications:

Engine Size: 1.1 HP
Power Consumption: 1kW
Voltage: 230 V @ 50 Hz
Rated Speed: 3450 rpm
Air Displacement: 5.5 CFM
Sound Level: 97 dB
Discharge Pressure: 115 PSI / 8 bar
Tank Capacity: 8 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: 510 x 250 x 510 mm

 

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.