SGS 8 Litre Direct Drive Air Compressor & Spray Gun Kit – 5.5CFM, 1.1HP

This highly portable 8L air compressor is designed with performance and efficiency in mind. Thanks to the high flow of 5.5 CFM air displacement and 8 bar maximum working pressure this compressor is ideal for tyre inflation, nailing, stapling, sanding and cutting as well as being used with the included spray gun kit. Fitted with a twin air outlet, the adjustable outlet air pressure regulator makes this machine a highly popular choice for the discerning user. Fitted with a Euro quick release connector this compressor offers a fantastic combination of performance, safety and value for money. 

	The powerful 1.1 HP motor is capable of delivering up to 5.5 CFM.
	The 8 litre tank is ideal for spraying, inflating, stapling, sanding, drilling and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. 

Please note this compressor is for semi-pro and not commercial use. 

Included: 

8L air compressor  
HVLP 1000ml Aluminium Gravity Fed Spray Gun 
10m long 8mm diameter Rubber Hose With Quick Couplers 
Mini Inline Air Filter & Water Trap 
Euro quick coupler

Specifications: 

Engine Size: 1.1 HP 
Power Consumption: 1kW Voltage: 230 V @ 50 Hz 
Rated Speed: 3450 rpm 
Air Displacement: 5.5 CFM 
Sound Level: 97 dB 
Discharge Pressure: 115 PSI / 8 bar 
Tank Capacity: 8 litres 
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section. 
Size: 510 x 250 x 510 mm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.