SGS 6 Litre Oil-Less Direct Drive Air Compressor & Starter Kit – 5.7CFM, 1.5HP

The SGS 6 litre oil-less air compressor is ideal for DIY and trade applications such as spray-painting, tyre inflation, nailing, stapling, sanding and drilling thanks to it’s 6L capacity, high flow 5.7 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money. Also included are are all the hoses, accessories and fittings needed to start using the compressor with the air tool of your choice.

	The powerful 1.5 HP motor is capable of delivering up to 5.7 CFM.
	The 6 litre tank is ideal for nailing, stapling, sanding, drilling, grinding and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

SGS are a British company; our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. Parts, spares and consumables such as oil and air filters are available from SGS.

Please note this compressor is for semi-pro and not commercial use.

Included:

6L air compressor
10m Rubber Hose With Quick Couplers
Air line oil
Euro quick couplers
Mini Inline Air Lubricator
Mini Inline Air Filter & Water Trap

This compressor is fitted with a standard 13A UK plug.

Engine Size: 1.5 HP
Power Consumption: 1.1 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Air Displacement: 5.7 CFM
Sound Level: 80 dB
Discharge Pressure: 115 PSI / 8 bar
Tank Capacity: 6 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.” BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: (L) 485 x (W) 265 x (H) 550 mm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.