SGS 5 Piece Air Tool Kit With Quick Fittings – Spray Blow Oil Gun Tyre Inflator & Hose

5 piece air tool kit with quick release fittings including gravity fed spray gun, tyre inflater and pressure gauge, blow gun, paraffin gun and a 4m spiral hose.

SGS 5 piece 1/4″ BSP air tool kit complete with:

Tyre inflator with pressure gauge
This inflator reads in bar & psi and has a maximum working pressure of 8 bar. It is suitable for inflating most tyres on motor vehicles, bicycles, etc. The gauge has a tough rubber moulding.

Air blow gun
With an 8 bar maximum working pressure, use this blow gun for displacing dust, wood shavings, swarf, metal filings, etc. Use a lower pressure when cleaning dust from electronic components.

4 metre spiral air hose
Fitted with 1/4″ BSP female couplings, this recoil style hose connects all the other items in the tool kit to your compressor.

Oil spray gun with suction cup
With a capacity of 0.9 litre and maximum working pressure of 3.5 bar, this spay gun is ideal for spraying things like paraffin, engine de-greaser, creosote and insecticide.

Paint spray gun
This professional style spray gun has a 0.6 litre gravity fed cup and a 4 bar maximum working pressure. Fitted with a 1.5mm nozzle, the gun is ideal for spraying almost any type of conventional paint. The airflow through the air cap draws paint into the nozzle assembly, where it is atomised and sprayed forward. The spray gun requires 4.5-8CFM and air pressure of 45psi.
Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.