SGS 100 Litre Direct Drive Air Compressor & Heavy Duty Ratchet Kit – 14.6CFM 3.0HP 100L

Perfect for a serious home garage and professional applications, the SGS 100 litre air compressor and ½” heavy-duty impact wrench kit is a great value starter set, complete with everything you to get straight to work.

	The powerful 3 HP motor is capable of delivering up to 14.6 CFM.
	The 100 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

With a high air displacement of 14.6 CFM and a maximum working pressure of 115 PSI / 8 bar, you’ll be able to use the 880Nm impact wrench to its full capabilities. This kit includes a complete 38 piece drive seep socket set, two air hoses, couplers and fittings, as well as compressor and airline oil.

The SGS compressor is fitted with a powerful 3.0 HP electric motor, meaning you’ll never be waiting long for the air tank to refill, making it perfect for serious impact wrenching and spray painting. This tool kit conforms to the highest safety standards and is designed and built by our expert engineers. Use your air tools with confidence; fully European CE and German GS certified.

Please note this compressor is for semi-pro and not commercial use.

Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Included in this kit: –

100L air compressor –
1/2″ Heavy Duty Air Impact Wrench
38 Piece Drive Deep Air Metric & Imperial Socket Set
2 x 10m long 8mm diameter Rubber Hoses With Quick Couplers
Air Filter, Water Trap, Regulator & Lubricator
Euro quick couplers
Compressor oil
Airline oil

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.